1. What's the characteristics of slap-up sanitary?
   Answer: There are two guide lines to judge it except the quality, appearance and function:
   1. Water-absorbing rate: It is one of the most important factors of sanitary agglomeration, which is also an important factor to distinguish ceramic. The higher the water-absorbing rate is, the weaker the agglomeration is, and the more easily the body absorbs water. Later Cover of ceramic glaze cracks for absorbing too much water and swelling, and it becomes smelly at the same time.
   2. Crack-resist: It is an important factor to test the ability to bear sudden cold and hot. The chap comes out frequently because of the low crack-resist of sanitary. Except the high water-absorbing rate, swelling too much between body and ceramic glaze is another reason, so the chaps happen while using in great difference in temperature.

2. Is the cover of ceramic glaze easy to lose glare while washing?
   Answer: It doesn't happen if only emery cloth and sharp appliance are not used while washing.

3. How long is the breath of toilet?
   Answer: The average breath is between 40CM and 50CM

4. Is the washing effect related to the height of water tank?
   Answer: Physically speaking, it is. But our products still can reach the standard of water saving.

5. What's the distance of toilet pit?
   Answer: Every Bolo products has two sorts. One is 305CM, the other is 400CM.(Pit means the distance between the wall and the center of drainage)

6. Can we change the sititng quoit for another one?
   Answer: The same type can be changed.

7. How longe can we use the button on the water tank.
   Answer: It has been tested that it can be used for 50000 times.

8. Must the basin with pesdestal drain underground?
   Answer: No, It can drain both underground and through the wall.

9. What's the width fo table-board and height of being fixed?
   Answer: The width is 55CM-60CM, and the height is 80CM.

10. What's the fixing height of urinal?
    Answer: About 90 CM (from the upper cover to the ground).

Tap:

1. Why is single-hole tap more expensive than double-hole tap?
   Answer: Single-hole tap needs two more tubes than double-hole tap.

2. What's kind of valve best?
   Answer: Nowadays, ceramic valve is the best in China market, because there is much impurity in the water. The traditional rubber valve tap is easy to be aging and aleak. But the ceramic valve is firm, endurable and airproof.

3. Is the water from tap spattering?
   Answer:No, all the Bolo taps have alveolic , which has five filtration.

4. Is the distance of shower tap 15CM?
   Answer:The international standard is 15CM. Our Bolo products are adjustable from 13.5CM to 17.5 CM.

Shower Cabinet:

1. Which one is best for door of shower cabinet, the push-pull or the one opened directly?
   Answer: Every type has its own excellence. The push-pull type makes use of room, but blocks are aging after using for some time, and the thickness of glass must be less than 6 mm considering the capacity of block. The opening type is more practical and decorative, and more fashionable. The glass ranges from 8 mm to 10 mm, which is safe and endurable.

2. What's average height when we fix the button of the shower cabinet on? What about the tap?
   Answer: The switch is fitted about 1.1M to 1.2M after tiles are spread. Tap is about 1.9M to 2 M.

Bathtub:

1. How much can a bathtub hold?
   Answer: 40 litres averagely.

2. Which bathtub is best, Acrylic tub, steel tub or cast iron tub?
   Answer: All has its traits. Acrylic has good heat preservation, diversified styles, light and easy to be fitted. The shortcoming is noisy while affused, and less endurable. Cast iron tub is endurable, and has good heat preservation It is more silent than acrylic while affused. But it is heavy and difficult to transport and fit. Steel tub is light, endurable, silent, and easy to be fitted, but has bad heat preservation.